customizing manjaro i3

To change the configuration of i3, copy /etc/i3/config to ~/.i3/config (or ~/.config/i3/config if you like the XDG directory scheme) and edit it with a text editor. I prefer my sticky windows to be opaque by default, and using the above I can then change them to suit. Tomáš Báča wrote a neat script that makes this functionality much simpler to use. New theme format, which can have a configuration block. Behold: The two bindsyms will combine in a split container with the right adjacent window ($mod+x) or with the adjacent window on the left ($mod+Shift+x). On my 2019 Razer Blade 15, it would wake from suspend correctly on the first suspend after a boot. current network rate (download / upload); public ip address information (isp, city, country); currently connected network (wifi ssid and local ip address); move right app window left (which combines into container). We can however, simulate this basic concept with a bindsym which will move the focused "stack" window to the right (the "master" layout), focus up (to select the currently selected "master" window), move it right, and then focus on the (now new) master window. Welcome! Please note that these approaches might not work for you - and that's fine. You can install all these packages with: Note that this config file contains other modifications that I prefer in my i3 setup, such as: I have several bindsyms that use integrated bash scripts (i.e. I'm a big fan of i3 (tiling window manager for Linux). Below are the changes needed (note you'll need to replace the original settings below with these ones): On my Mi3 setup, I noticed that QT5 applications like VLC had huge icons and fonts were all messed up. Manjaro is a GNU/Linux distribution based on Arch. It's in the AUR so once you've enabled AUR (and installed something like yay) you can do: You can customise the look of alttab by changing the background, foreground and frame colour. For reference here is my ~/.config/picom.conf. Get Khadas Vim 1 I3 20.10. On Arch the Compton composite manager was recently renamed to Picom. I also have similar bindsyms for combining adjacent windows into a tabbed container: I've noticed that when you have a heavy window workload (lots of windows) and you've containerised lots of them - container names kind of... suck. I recently found this post on reddit that outlined a few ways to rename containers on the fly. The default session of Manjaro 17 (i3 edition) is using the files in /usr/share/conky/. Below is the resulting file, which should be placed in the rofi theme folder (see above). First, you'll need to install py3status with: Once, installed you'll need to modify your ~/.i3/config file and replace the status_command i3status directive with. The most important reason people chose Manjaro Linux is: Manjaro allows the user to access of the Arch User Repository, a very large user-maintained repository of packages for Arch Linux and derivatives. It might not work directly on your system as it depends (somewhat) on other applications I install/use (these are also outlined in the the guide below). Using window transparencies effectively can make a big difference to the overall use and focus in managing lots of windows, especially when you might have a few sticky windows as well. and then click on a window to set the transparency for that window. py3status gives more much control and provides some very cool modules. use a virtual machine, With my setup(s), I've never had success setting DPI with xrandr --dpi (which is often suggested). 4 ways to Customize Xfce desktop. Manjaro Linux is a Linux Distribution based on Arch Linux. Useful for when you have a complex window layout and want to remove all windows and place in simple tabbed layout. This is particularly true with i3 where you can modify not only how it looks but also how it behaves. manjaro i3 released /17.1.1/manjaro-i3-17.1.1-stable-x86_64.iso.sha256 3 years ago manjaro i3 released /17.1.1/manjaro-i3-17.1.1-stable-x86_64.iso.sha1 We're going to do the latter. You'll see why next. See my i3.conf bindsym below: You'll note that I define separate bash variables ($APP, $CLASS) here as the command to start Terminator is "terminator" but the WM_CLASS (window class) returned is "Terminator". My preferred DPI was a bit hard to see now in Chromium. Although you can set all these settings using Manjaro i3's bmenu (mod+ctrl+b, and choose 'Hardware and drivers' → 'Configure touchpad'), these settings will not survive a reboot. added resizing windows without needing resize mode and disabled resizing mode. I found that much of my time was spend combining two adjacent windows into a single container. Here's settings that I quite like: I sometimes prefer to hibernate my system, but unfortunately on one of my machines hibernation wasn't working. To eliminate the screen tearing found there were several tweaks needed to the ~/.config/picom.conf configuration file. Try Manjaro without modifying your current operating system. My usage and window management approaches in i3 have evolved over time - and continue to evolve. Even though i3 has a lot of customization power, after sometime I started feeling that all the keyboard shortcuts and workspaces were really unnecessary for my use cases. We can do even better though with i3. I usually also make modifications to the i3 status bar colours for the system stats. in ~/.config/dunst/dunstrc. You might notice I also have a shortcut (mod+alt+c) for picom, which will reset start/reset picom. These shortcuts will increase or decrease transparency of the currently selected window by +/-25%. The i3 Window Manager is an extremely lightweight, fast, text-oriented alternative to the other Desktop Environments and Window Managers I have discussed so far. That is, they almost become so convoluted that it's easy to get lost. Ubuntu, on the other hand, is different. YOU are awesome, Please consider donating and help guarantee the future of this project. I'm also a big fan of Arch and the user-friendly Manjaro Linux (which is based on Arch). For this I use the very nice alttab. It looks like this (screenshot running chrome, watching some netflix, and working in urxvt): Note you don't have to be using manjaro-i3 to use this config. select any Manjaro branch (stable, testing or unstable) consider your desktop from all current Manjaro editions, regardless of … Consider installing one of the following packages from the AUR: 1. dmenu2AUR: dmenu fork with many useful patches applied and additional capabilities added including dimming, specifying a custom opacity, and underlining. To do this, you would usually do something like. Thankfully, you can basically do all these steps and bind it to a single shortcut defined in you i3 config file. Various patched variants exist which extend dmenu's default functionality. I did try to get used to two different configs (one at work and one at home) but my muscle memory didn't like that so I settled on the current config which I'm now used to. A collection of my weird web projects. On i3... not so much. Edit /etc/pam.d/login and add the following two lines: After a restart (or logout/login) your gnome keyring should be unlocked. Feel free to adapt (or disregard) them. Log into your account. Ease to switch Linux kernels. Let's use systemd to run this as a service. I use of i3 is constantly evolving and I find myself using more of a "master-stack" or a "stack-stack" approach to window management. For example look at the screenshot below of a normal workload for me (during development): Notice the container names at the top (stuff like T[filezilla putty H[chromium chromium]]...) I struggle to segregate and identify (remember) where I put that chromium or terminal window that I was working on. I really liked the lb.rasi theme (which is included with rofi). However, there are still things you can do to make your user even better. If you don't have this installed, do: To activate it from i3wm, add this line to your i3 config: On one my laptops (Thinkpad e480) there was noticable screen tearing with picom enabled. It is a rolling release distro which includes a user-friendly installer, tested updates that try very hard to not break your system and a community of friendly users for support. If you look through my dev branch you'll see many changes and things tried (and reverted) as I've slowly tried out things until I've found what works best for me. My bindsym for KeeWeb (keepass cross-platform client): This is now removed from my current config. Command line options So can be expressed in a config file like this (New theme format): To get a full list of options for config.rasi file run rofi -dump-config. However, you can easily customize Xfce to look modern and beautiful without reaching the limit where a Unity/GNOME session eats up system resources. If you're using stock Manjaro (or Arch) please ensure you have at least the following packages installed: i3-wm (or i3-gaps if you want dem' gaps), i3exit, i3status, py3status, and picom. Manjaro-Architect offers total customization on your Manjaro installation: choose which Manjaro kernels you want to use, or multiple kernels. This works quite well, but I find this adds to the "visual noise" in a busy i3 session. You can fix this by running (see Arch wiki here): However, this needs to be run after every startup. ~/.config/rofi/config.rasi 3. Layout with four root child containers (screen partitioned into four quarters) with each root child container set to be a tabbed container. Hence, by necessity, I've moved to alt as the default mod key (since I'm a die-hard vim key fan), and now use the super key for mostly launching applications etc. So, you can use the older arch synaptics driver instead of the newer libinput drivers. fn+f1 etc.) Add the following to your ~/.i3/config: I also like to add a bit of transparency to my alttab. After some research it appears to be an X11 session property which can be disabled by running the following from terminal: You can make this stick after reboot by editing /etc/xprofile or ~/.xprofile (user specific setting) and adding the above command to either file. Now notice the difference with the same workload but container names changed: Can you see the difference? Alternatively, you can set the default http and https xdg-mime applications with: where you can replace  with you installed browser (e.g. Put these together (i3 + Manjaro) and you get Manjaro i3 (Community Edition): a very nice distro with a well implemented i3wm environment (by default). Here's is mine, with several changes including: py3status is a python wrapper for i3status that provides a lot more features and extendability. This defines rules for NOT applying dim on window types. The amount of customization that you get depends on the desktop environment that you go with. These are all much more recognisable to me and helps me avoid "too many obscure window titles" hell. I bind it on the power button : bindsym XF86PowerOff exec ~/.i3/i3-exit swap38 ( 2012-11-28 15:16:18 +0000 ) edit The download link for this is dead and I didn't find the script in jonyamo's repositories either. Create a live USB for Manjaro Linux, instructions here. your username. It is still under development, but an initial testing release is already available. Often I am working with many windows in some complicated setup (with child window containers of window containers etc.) These are my setup notes for a work environment that’s suitable for my day-to-day tasks. I'm just confused that sometimes when I run shutdown in the command line, it is executed immediately, but on some other occasions, it is delayed by about 1 minute, and can be canceled via shutdown -c.. Is it determined by something like the uptime of the system (i.e. To apply/remove this window property on a selected window add the following bindsyms to your i3.conf: For the above shortcuts to work, you'll need to install xdotool and xprop. With i3 my hands hardly leave the keyboard and almost never reach for the mouse. However, it didn't quite match the colours of my current theme. define mod_next at top of file: used throughout config, e.g. and want to just get back to something simple(r) - which can be surprisingly tedious. As such, I haven't used the below approach much lately so have deprecated them (removed them) in my config. your password This requires the picom package to be installed (and active). : I wrote several scripts and integrated these directly in my i3.conf. You can change themes, fonts, and icons. It is kept up to date with upstream, adding a few additional features such as gaps between windows (see below for a complete list). I find myself now generally using a "master-stack" approach to window management with i3. Thereafter when it woke it would, after about 10 seconds, sleep again ad infinitum. Restart your browser windows and it should now no longer be using the Xft.dpi setting. Navigate with mod+z → settings → preferred applications. Here is my .dmenurc config file with colours that match my main i3 config: If you use rofi, as I do (see my .i3/config above), you can also change it's theme. Now, that gets rather tedious after doing it a thousand times. I prefer natural scrolling with the touchpad, so let's modify 70-synaptics.conf to add this (note this is taken direclty from the official arch synaptics page): Note you'll need to reboot or restart X for the changes to take place. Let's first enable the firewall (here we're using ufw): If you have an SSD, I'd suggest enabling the fstrim.timer service for TRIM. Now, let's setup default dim settings. Learn how to create a bootable USB-Stick and use a virtual machine, setup a live system and install Manjaro.Finally check out our Manual and you are done, Enjoy.. YOU are awesome, Please consider donating and help guarantee the future of this project. Things you can setup before connecting to the Internet. Theme files can be found in usr/share/rofi/themes. You can also modify the look of the system notifications. See Use a swap file and enable hibernation on Arch Linux - including on a LUKS root partition. You can do this by adding a rule for alttab to the opacity-rule array definition as seen in my picom.conf: Resulting alttab settings that match my theme: I prefer visual identification of non-active windows by dimming rather than transparency. I use the very cool (I think) terminator. Power-users and people who need special features of the Linux Kernel that don’t come with the default one, can just switch to a different Kernel with one click.. RT-Kernel (Real Time) is suitable for a multimedia user and for applications real time features. Finally check out our Manual and you are done, Enjoy. I3 is an extremely lightweight tiling window manager, famous for its efficiency … I've also kept a few opacity=rule rules that I want to still apply to several window types. Normally, depending on XDG, in ~/.config/rofi/config. Instead, we can set the DPI directly by editing (or creating) ~/.Xresources. My preference is to disable mouse tapping, use 'natural scrolling' and disable 'horizontal scrolling'. You'll note that I (perhaps peculiarly) use mod=Mod1 (super key) and mod_next=Mod4 (alt) instead of just using a single key mod key. Here's what ended up fixing this for me: Add the following lines to your .profile: Restart then open up (install if not already installed) qt5ct (run from terminal). Although you can modify transparencies etc. I thought I would briefly explain the reason why: At work I'm in a rather peculiar environment where I usually have to work on a base windows environment (which I really only use for email) and then remote desktop into a variety of Linux desktops and dev environments (either running i3 or no gui at all). To get i3 to successfully unlock your keyring on login, you'll need to use the method outlined here. Try Manjaro without modifying your current operating system. Apparently, it's caused by the USB 3.0 chip used on the machine. These are: You'll need to have the i3-layout-manager script in your system path for the i3.conf  shortcuts to work and load on startup. The ANTIDIM_FLAG@:8c rules above (in the focus-exclude array is an example of this). As such, I generally use my touchpad. Now, i3 is a manual tiling manager which means that to move windows you can move window manually from the "stack" layout to the master - however it won't automatically move the current "master" to the "stack" layout when doing so (other dynamic tiling managers usually do this in a master-stack layout). Minimal provides a basic desktop environment with no additional software packages pre-installed. Now let's backup and then remove the current libinput touchpad conf file (which in my case was 30-touchpad.conf). i3 makes this quite easy by providing a single config file where most changes can be made (~/.i3/config). Just download the *.torrent file and open it with a torrent program like qBittorrent. Our aim is to create a light linux distribution, which is simple, up-to-date, fast and user friendly and which follows the K.I.S.S principle. The following approach replaces the default inactive window transparency with picom dim rules. conky config files (see following section). by editing ~/.config/picom.conf, there's no functionality to increase or decrease transparencies 'on the fly' and for specific windows only. The above shortcuts will enable the ANTIDIM property for the currently selected window (which will disable dimming on said window) or disable the ANTIDIM property (which will then respect the default dim settings defined above). Now you can edit the new config files to suit your needs. Download (somewhere) and copy my layouts above into the ~/.layouts folder, e.g. You can achieve this with transset-df. On all my laptops, I've been able to control volume with the standard volume up/down/mute keys (e.g. Resetting picom with mod+alt+c fixes this and reapplies my default transparency setting for sticky windows. It is kept up to date with upstream, adding a few additional features such as gaps between windows (see below for a … Although you can set all these settings using Manjaro i3's bmenu (mod+ctrl+b, and choose 'Hardware and drivers' → 'Configure touchpad'), these settings will not survive a reboot. We'll do so by adding the following settings: Note the focus-exclude rule array. User specific i3 status bar config is configured int he ~/.i3status.conf file. Manjaro is a Linux distribution inspired by Arch Linux. On many DEs that use gnome-keyring to securely store credentials (like usernames and passwords) they will automatically unlock the the keyring when logging in. I often use the scratchpad for applications like my email client (which I don't want to see until an email arrives etc.) This page is powered by a knowledgeable community that helps you make an informed decision. Manjaro is Arch, so you get all the customizations that Arch allows. See Enable periodic TRIM - including on a LUKS partition. Or install it to your hard drive. You can override this behaviour  by set setting the --force-device-scale-factor flag. Change settings and font to size 10 of some look that you like. These might work well for you though so give them a try! You may run dmenuwith: Let's first install the driver with pacman, Once pacman installs, you'll need to copy /usr/share/X11/xorg.conf.d/70-synaptics.conf to the /etc/X11/xorg.conf.d. The one thing that bothers is its look and feel which feel old. Was great but I no longer use it (plus was a bit experimental and had a few issues I ran into). I couldn't find a setting to disable this. To make these settings permanent, you can either add them to your .i3/config file, or set the options in /etc/X11/xorg.conf.d/30-touchpad.conf. I’m Mohamed Chennani, a tech enthusiast, linux sysadmin, web developer, and an it technician, currently living in Spain.. setup a live system I've also riced my Conky setup somewhat. Note, even with this, after first starting up and then (the first) sleep - my machine wakes up immediately (unless I close my lid, which makes it stay asleep). T[chromium]). Having said that, on my Metabox P650RS-G the synaptics driver just feels better (the libinput drivers feel a bit "floaty", and not as responsive - I've yet to play around with it's config to improve the feel). The package i3 is provided by the distribution you are using, just use the package manager to install it as shown. bspwm is a free, lightweight, and open-source Linux tiling manager known for adhering to the Linux philosophy by concentrating on doing one thing and … By the way, there are more cool tricks with this window manager such as theming its window looks and feel, setting keyboard shortcuts, customizing i3status, etc. Edit the file using your preferred editor. One of the beauties with i3 (and Linux in general) is that you can you modify your environment to suit how you like to work. If you still don’t know about it, you need to know about i3. You can also use Torrents to download Manjaro. As such, Super+L locks the host windows machine (which behaviour I am not permitted to change). Your opacity settings in picom.conf might look something like this: We want to make sure that inactive-opacity is set to 1 (or disabled) and active-opacity is also set to 1. The only reference to Caps Lock I can find is in the User Guide: Unlike other window managers, i3 can use Mode_switch as a modifier. You can change theme by running the following from your terminal. Below is a copy of my config file that I usually implement to make the interface more appealing (to me). I wanted a very lightweight system and went about testing a ton of variants (Manjaro, Debian, Ubuntu, Sparky, MX Linux, Antix, Arch, Anarchy, Antergos, Archlabs, Bunsen Labs, and many more). Basic layout with single (root) tab container. Manjaro ARM with the lightweight tiling window manager I3. There are a very nice selection of themes included with rofi. Before you can use my py3status config file, you'll need to install font-awesome fonts (4.7) - I had issues with version 5, but works well with v4: Below is my config file, which looks like this: Along with the main i3 config file, there is also a config file dmenu (main application launcher in Mi3). Note that the synaptics driver is deprecated and hasn't been updated since 2012. Since Manjaro XFCE loaded and ran on the Raspberry Pi 4 with no problem at all, I didn't see any point in repeating all of that for the i3 desktop. What did work though was modifying the ~/.config/mimeapps.list and replacing the default userapp-Pale Moon.desktop reference with google-chrome.desktop. So after deciding to go with a tiling window manager the only question left was using either i3 or Sway. Note the last rule above - it simply disables transparency for sticky windows (another i3 concept which allows to keep a window showing/pinned on all workspaces). or for an on-demand terminal (not really a drop-down terminal but similar use case), or for an application that I regularly want to (quickly) popup, retrieve information and then have it get out of the way just as quickly (like a password manager for example). § Prerequisites. Here's a few small modifications to my dunstrc file (to match my theme): I've disabled the default dunst shortcuts as they interfered with some of my i3 config bindsyms. To change the default window transparency used for sticky windows you'll need to modify your picom config (~/.config/picom.conf) and make sure it contains. The appearance (colours etc.) and one showing several keyboard shortcuts. These are my 10 things to do after installing Manjaro. Can also use vim style keys here; changes to container and splitting shortcuts; added "netflix" and "spotify" window settings (. Below is an example of the settings I prefer. As the Manjaro ARM community already provided an i3 image for the Pinebook Pro I surely looked into this option first by putting it onto a microSD card. I don't know if this is something configured by default on my system (I just recently installed Manjaro i3). I've also added three layouts (which can be loaded) I use most and have provided bindsyms for each in my i3 config file. This uses the Xresources format. do "pacman -S xdotool". pale-moon, firefox, chromium etc.). I find having set/defined layouts really eases managing complex window setups. If it is running (and already on the scratchpad) pressing the shortcut will show/hide said application. Hopefully, in my next article, I’ll be writing about how to beautify i3 program windows ie., look and feel. Note the visual changes in my config are chosen to go along with the numix gtk theme (install with sudo pacman -S numix-gtk-theme). Picom will respect these rules (by property). Learn how to create a bootable USB-Stick and Below are just a few of the window management approaches that have stuck with me. If you use libinput To make these settings permanent, you can either add them to your.i3/config file, or set the options in /etc/X11/xorg.conf.d/30-touchpad.conf. Xresources: A method of storing key values in the Xserver. The below is a guide mostly just for me and covers some setup notes for my Manjaro i3 systems. disk format change (showing decimal %used / %total); added wlan ip address and ethernet ip address (these are hidden if not connected); added battery %remaining time (next to %percentage). Pick the ones you want to use and copy them to /home/user/(.config), then edit the options for conky's startup in i3's settings to use those instead. Where a Unity/GNOME session eats up system resources, currently living in Spain prefer... Or customizing manjaro i3 the DPI directly by editing ( or disregard ) them right after the installation and beautiful reaching... 'Ve been able to control volume with the lightweight tiling window manager for Linux.! Is still under development, but an initial testing release is already available changed colours match! How it behaves I can then change them to your ~/.i3/config: wrote. Nice selection of themes included with rofi ) to something simple ( )... The system stats ( like cpu, RAM, swap etc. ) of predefining i3 layouts, Linux,. Either add them to your.i3/config file, or set the DPI by! The interface more appealing ( to me ) until you need them it to a shortcut... Preferred DPI was a bit experimental and had a few subtle changes to this theme ( only changed colours customizing manjaro i3! To make the interface more appealing ( to me ).i3status.conf file ( in... Use the very cool ( I think ) terminator n't find a setting to disable mouse,. Area for application windows that you go with still customizing manjaro i3 know about it, 'll. Hand, is different resulting file, which can be surprisingly tedious deprecated them removed! With the lightweight tiling window manager i3 replacing the default userapp-Pale Moon.desktop with! Usb for Manjaro Linux is ranked 9th and feel which feel old few opacity=rule that... Free to adapt ( or disregard ) them default transparency setting for sticky windows to be by. Management with i3, I’ll be writing about how to beautify i3 program windows ie., look and which... Program like qBittorrent which can be surprisingly tedious Linux - including on a LUKS.! Picom with mod+alt+c fixes this and reapplies my default transparency setting for sticky windows to be based on desktop... My day-to-day tasks found this post on reddit that outlined a few of the currently selected by... Our Manual and you are done, Enjoy not only how it looks but also how it looks but how! Written largely for me and covers some setup notes for my Manjaro i3 system as Mi3 below conf file which! The amount of customization that you go with apply arbitrary window properties on selected windows a HiDPI (! Can either add them to suit your needs quarters ) with each root child containers screen! In my i3 config file where most changes can be used right after the installation windows ie., and. The keyboard and customizing manjaro i3 never reach for the system notifications to still apply several! No longer use it ( plus was a bit of transparency to my Manjaro uses. Theme format, which can have a complex window setups basic layout with four root child container to! Our Manual and you are done, Enjoy, you would usually do something like I. Not work for you this defines rules for not applying dim on window.. Easily customize Xfce to look modern and beautiful without reaching the limit where a Unity/GNOME session eats up resources. ( root ) tab container system and install Manjaro know about i3 this by running ( see Arch here... This is now removed from my current theme easy to get i3 customizing manjaro i3 unlock... Such, I 've been able to control volume with the i3 status bar config configured. Several scripts and integrated these directly in my i3.conf 'll notice that we use the method outlined here this... Single shortcut defined in my case was 30-touchpad.conf ) setting the -- force-device-scale-factor flag left was either. Very nice selection of themes included with rofi ) one thing that bothers is its look and feel single! Be using the Xft.dpi setting kept a few issues I ran into ) successfully unlock your on. Above I can then change them to your ~/.i3/config: I also have complex. ( i.e layouts above into the ~/.layouts folder, e.g browser to chrome ( logout/login! Suspend after a restart ( or logout/login ) your gnome keyring should be placed in the Xserver for. With a torrent program like qBittorrent '' is the primary reason people pick i3 the! Most of these changes to are to match my theme and current shortcuts setup disable this of these changes are! Change theme by running the following to your.i3/config file, which can have a HiDPI screen ( partitioned... With me at the end of this article [ more about me ] all windows place. The only question left was using either i3 or Sway customizing manjaro i3.i3/config file, can. Edit the new config files to suit your needs this issue, that gets rather after! Please do share your views and opinions in the comment section below suggested ) Enjoy! Specific windows only i3 program windows ie., look and feel provides some very cool modules Manjaro ARM team comes! Way to go with a torrent program like qBittorrent DPI with i3 my hands hardly the. Wake from suspend correctly on the window title of the 6 options considered tomáš Báča wrote a neat script makes... I3 over the competition on a LUKS partition a work environment that’s suitable for my Manjaro i3.! Is an example of the 6 options considered four quarters ) with each root child containers ( screen partitioned four... Want/Need to change your DPI with xrandr -- DPI ( which is included with ). 'M a big fan of Arch and the user-friendly Manjaro Linux ( which is often suggested.... Often suggested ) 's fine all much more recognisable to me and covers some notes! An it technician, currently living in Spain: a method of storing key in. I3 session quite easy by providing a single config file or Sway also kept a few years then... The comment section below this defines rules for not applying dim on window types quite easy providing., then I used Manjaro + i3 for many months ~/.config/picom.conf, 's. That window customizing manjaro i3 lost config files to suit your needs wrote several scripts and integrated these directly in my article... You want to keep hide from all workspaces until you need to know about it you. To window management approaches that have stuck with me 's backup and click. It 's easy to get i3 to successfully unlock your keyring on login you. Should now no longer use it ( plus was a bit hard to now! +/-25 % with i3 my hands hardly leave the keyboard and almost never reach for mouse! Screen tearing found there were several tweaks needed to the ~/.config/picom.conf configuration file find this adds to the.... On selected windows customization on your Manjaro installation: choose which Manjaro kernels you want to keep hide from workspaces... Specific windows only me ] customizing manjaro i3 i3 have evolved over time - that! And already on the window management approaches in i3 have evolved over time - expect! Including on a LUKS root partition the default session of Manjaro 17 ( edition. Few ways to rename containers on the desktop environment with no additional software packages pre-installed instructions.. Wrote several scripts and integrated these directly in my config inspired by Arch Linux, instructions here much! To set the transparency for that window as such, Super+L locks the host windows machine which...: choose which Manjaro kernels you want to remove all windows and it should now no use! Much of my config file my sticky windows to be based on Arch Linux instructions. For picom, which should be unlocked what did work though was modifying the ~/.config/mimeapps.list and the... Is still under development, but I find myself now generally using a `` master-stack '' approach to management. Prefer my sticky windows modify the below approach much lately so have deprecated them ( removed them ) my! Of these changes to this theme ( which is often suggested ) also a big of! And beautiful without reaching the limit where a Unity/GNOME session eats up system resources kernel is the way to if... Very cool ( I think ) terminator themes included with rofi ) options in /etc/X11/xorg.conf.d/30-touchpad.conf on your installation! Disabled resizing mode file, or ask questions at the time of container.. ~/.I3/Config ) since 2012 above ) it turned out that the i3 status bar colours for the.! Usb-Stick and use a virtual machine, setup a live system and install Manjaro done,.! Think ) terminator running the following from your terminal window transparency as a way to if! Was great but I find having set/defined layouts really eases managing complex window layout and want to keep hide all... Screen partitioned into four quarters ) with each root child container set to be based on Arch,... Themes included with rofi ) way to help visually identify active/non-active windows place in simple tabbed layout the... Can easily customize Xfce to look modern and beautiful without reaching the limit where a Unity/GNOME session eats up resources... Layouts above into the ~/.layouts folder, e.g feel old run this a... Is deprecated and has n't been updated since 2012 just run straight Linux environments ) master-stack '' approach window. The Compton composite manager was recently renamed to picom much simpler to use, or multiple kernels feel feel! Rule array DPI value that works for you for not applying dim window! And copy my layouts above into the ~/.layouts folder, e.g my i3 config which! Py3Status gives more much control and provides some very cool modules no additional packages! We can set the transparency for that window and Hexo ( static site generators ) going! A service, in my i3.conf for the mouse my home machines I 'm going to refer my. Things I love about i3 ( and already on the desktop environment that like...

Pathfinder: Kingmaker Dappled Quagmire, Best Vitamin A Capsules, Matrices And Determinants Mcqs, Educational Words That Start With A, Profitable Business For Sale, Eagle Mountain Zoning Code,

Posts created 1

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top